Claber 8497 Tempo myAquasolar Water Timer

Tempo myAquasolar Water Timer

Battery Free Solar Powered One-Way Automatic Garden Water Timer. Equipped with a built-in photovoltaic panel, this timer is powered by solar energy even without the panel being exposed directly to sunlight. No batteries are required. Easy programming with Bluetooth® technology and Claber myAquasolar app. Button to turn off the timer and start the manual function (that can also be activated from the app). Weekly watering cycles may also be programmed except for the days you wish to omit. Electronic components are fully insulated. 3/4” (20-27 mm) tap connector with pivoting ring nut. Washable filter. Operating pressure 0,5 - 10 bar. It can be connected to a standard Rain Sensor 90915 (Not included).

To start using myAquaSolar, download the myAquasolar app (available on Google Play and the App Store) onto your smartphone. 

myAquaSolar provides you with two irrigation programmes, A and B. You can set a start time duration (from 1 minute to 3 hours and 59 minutes) and choose the days of the week you want to water on both programmes. Please remember to charge the timer before you connect it to the app.

You can run manual irrigation from the myAquaSolar app or the timer. To activate manual irrigation from the timer, repeatedly press the Dual myAquaSolar button until the LED flashes green or yellow, according to the desired line. In this case, manual irrigation will run for 15 minutes.

To comply with the manufacturer's warranty, ensure that at the end of the season, before the winter frosts, the timer is disconnected from the tap and stored in a sheltered place, away from damp, where the temperature does not fall below 3°C.