Long Fan Watering WandThe Claber 8922 adjustable watering wand gives a fine, soft, gentle spray. The wand has a non-slip handle grip and a regulating valve on the handle. It is ideal for gentle watering with precision, including plants that are hard to reach: rustproof metal shower head plate and a ..
Drainage ValveThe Claber 90910 Threaded Drainage Valve is used for automatic irrigation system drainage. It is handy in areas with cold winters. The valve is constructed from brass and ABS and has a 1/2-inch male thread and a 3/4-inch adaptor. This valve automatically drains the system after use, pr..
Claber 91260 Fitted Rigid Risers Claber 91260 is a rigid riser that fits perfectly with micro sprinklers, misters, and sprayers. It allows you to place them at a height of 30cm and can be easily screwed into the 1/2" (13-16mm) main tube or 1/4" (4-6mm) feeding tube. To install the Claber 91260 ..
Micro Sprinkler Support StakesThe Claber Micro Sprinkler Support Stakes are designed to help you position micro sprinklers, misters, and sprayers at an adjustable height of 30 and 50cm. These stakes use a 1/4-inch feeding tube connected to the main tube or hosepipe. To install a support stake, all y..
Hose Pipe Hole PlugsThe Claber 91170 Hole Plugs are made of POM (polyoxymethylene) and designed for drip irrigation systems. They allow you to seal holes in the 1/2-inch main tube or an end stopper with 1/4" (4-6 mm) feeding hose. The Hole Plugs have an easy grip and watertight seal, guaranteeing no..
Hose Pipe Hole PunchThe Hose Punch makes holes in a 16mm supply pipe suitable for 4mm irrigation connectors and components such as drippers and micro-sprinklers. Key Benefits Include:Punching holes into a 16mm supply hose / main tube.Perfect for 4mm connectors and components..
Feeding Tube Support Stakes Pack of 40The Claber 91190 is a 1/4" support stake to secure feeding tubes in drip irrigation systems. It is made of durable polypropylene and has a pointed end that can easily be inserted into the ground. The stake is 12cm tall and can be used in plant pots or garden soi..
Feeding Tube Support StakesThe Claber 91190 is a 1/4" support stake to secure feeding tubes in drip irrigation systems. It is made of durable polypropylene and has a pointed end that can easily be inserted into the ground. The stake is 12cm tall and can be used in plant pots or in garden soil.Suppor..
Radio Frequency Rain SensorThe Claber 90831 Rain Sensor RF automatically interrupts the irrigation programme when it rains and starts it again on the next cycle when the rain has stopped. Operating on radio frequency, it works with Claber Tempo, Dual, and Hydro 4 water timers. The RF Rain Senso..
Triple BarbedThe Water-It triple barbed hose pipe end stopper shuts off water flow at the end of the hose pipe/tube. The standard size of Hose Pipes in the United Kingdom is a half-inch diameter (13-16 mm). The 13mm refers to the inner diameter, and the 16mm refers to the outer diameter of the suppl..
Hose Pipe Tube ClampsThe Claber 91096 Tube Clamps are used when water pressure in the 1/2-inch hosepipe/main tube exceeds 1.5 Bar—made from Polyoxymethylene (PE). It is designed to provide extra security and leak protection, especially in areas with high water pressure.Tube ClampsAddition..
Water MeterThe Water Meter AquaCount from GARDENA is a great help when watering your garden, measuring water consumption, and regulating/saving. Thanks to the included battery, the water meter is immediately ready. It can be connected either to the tap or directly to the end of the hose in a horizon..